Andre van Huyssteen Furious 200Details

Post

Posted by	Post	Photos
Die Hard 7/19/2019 7:24:08 AM Viewed: 630	On 13 July's practise, I changed the prop to the standard Trojan prop that is bigger than the standard Furious prop but it made no difference. I had to limit the amps so the rpm came down. I presume I would need to change to a bigger speed controller to get the same rpm but with a bigger prop		Details
Vankie 7/19/2019 7:27:13 AM Viewed: 612	Standard prop? as per supplier? or changed due to our 1500m above sea level?		Details
Die Hard 7/19/2019 7:48:28 AM Viewed: 588	The first session was per supplier's prop but the second session was with the Trojan prop. The hole for the 8x8 prop is still to small and needs to be reemed to fit.		Details
Die Hard 8/6/2019 5:53:32 PM Viewed: 565	I used an 8x8 at the event of the 27th. The change in prop did not increase the speed. So it seems, by increasing a prop but decreasing the rpm not to overload speed controller has rather a negative effect. The next step will be to upgrade to an 80 Amp speed controller if it would fit in,		Details
Die Hard 8/17/2019 1:54:31 PM Viewed: 602	Using an 80A speed controller I managed to break the 200kmh barrier for this plane		Details
Die Hard 10/2/2019 5:36:23 AM Viewed: 566	I killed the plane. Not enough elevator on a very strong down wind. Rest in Pieces.		Details

---